FUJITSU PRIMERGY RX900 S1 - Manual (Page 301)

RX900 S1 Maintenance Manual 301
Cables
4. "Closing the server" on page 47
5. "Mounting the server in the rack" on page 49
6. "Bringing the server back to operation" on page 51
7. "Closing the rack door" on page 51
15.2 Replacing the control panel cable
15.2.1 Required tools
● Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
● Replacing the control panel cable: tool-less
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V
CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.