FUJITSU PRIMERGY RX900 S1 - Manual (Page 271)

RX900 S1 Maintenance Manual 271
Baseboard
14.4.3 Inserting the TPM
Figure 168: TPM board
Server-specific installation rules are:
● Only the TPM board is used from the available TPM installation kit, see
figure 168 .
● The metal spacer and the Phillips screw are already installed on the
baseboard.
Figure 169: Checking the installation position
Ê Remove the Phillips screw from the metal spacer (A).
Ê Make sure that the metal spacer (A) engages properly in the baseboard.
C A C B