Fan modules, 7fan modules – FUJITSU PRIMERGY RX900 S1 User Manual
Page 101

RX900 S1
Maintenance Manual
101
7
Fan modules
The server is supplied with four hot-plug fan modules in a 3+1 redundant
configuration. In other words, if one of the four fan modules fails, the system will
operate without any problem.
V
CAUTION!
●
Do not disassemble the power supply unit. Doing so may cause
electric shock.
●
Do not damage or modify internal cables or devices.Doing so may
cause a device failure, fire, or electric shock.
●
Devices inside the server remain hot after shutdown. Wait for a while
after shutdown before installing or removing internal options.
●
The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
●
Do not touch the circuitry on boards or soldered parts. Hold the
metallic areas or the edges of the circuit boards.
●
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
●
The installation indicated on this note is sometimes changed to the
kind of possible options without notice.
●
Follow the safety instructions in the chapter