FUJITSU PRIMERGY BX600 - Manual (Page 78)

Panel Settings Menu
Web-Based Management Interface
Intelligent Blade Panel Module
77
Viewing SNTP Global Status Page
Non-Configurable Data
Version - Specifies the SNTP Version the client supports.
Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may
be supported by a client.
Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated
the system clock.
Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or
receipt of an unsolicited message.
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited
message for both unicast and broadcast modes. If no message has been received from a
server, a status of Other is displayed. These values are appropriate for all operational
modes.
• Other None of the following enumeration values.
•
Success
The SNTP operation was successful and the system time was
updated.
• Request Timed Out A directed SNTP request timed out without receiving a
response from the SNTP server.
•
Bad Date Encoded The time provided by the SNTP server is not valid.
• Version Not Supported TheSNTP version supported by the server is not
compatible with the version supported by the client.
•
Server Unsychronized
The SNTP server is not synchronized with its peers.
This is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death The SNTP server indicated that no further queries were
to be sent to this server. This is indicated by a stratum field equal to 0 in a message
received from a server.
Server IP Address
- Specifies the IP address of the server for the last received valid
packet. If no message has been received from any server, an empty string is shown.