FUJITSU PRIMERGY BX600 - Manual (Page 210)

System Log Management Commands Command Reference
Intelligent Blade Panel Module
209
Default Setting
None
Command Mode
Privileged Exec
Display Message
Message:
The message that has been logged.
Note: Message log information is not retained across a system reset.
7.6.3 show logging traplog
This command displays the trap log maintained by the IBP.
The trap log contains a maximum of 256 entries that wrap.
Syntax
Show logging traplogs
Default Setting
None
Command Mode
Privileged Exec
Display Message
Number of Traps since last reset:
The number of traps that have occurred since the last
reset of this device.
Trap Log Capacity:
The maximum number of traps that could be stored in the IBP.
Log:
The sequence number of this trap.
System Up Time:
The relative time since the last reboot of the IBP at which this trap
occurred.
Trap:
The relevant information of this trap.
Note: Trap log information is not retained across a IBP reset.
7.6.3.1 show logging hosts
This command displays all configured logging hosts.