FUJITSU PRIMERGY BX600 - Manual (Page 258)

System Utilities Command Reference
Intelligent Blade Panel Module 257
7.10.2.9
This command sets the time zone for the IBP’s internal clock.
Syntax
sntp clock timezone <0-12> <0-59> {before-utc | after-utc}
- Name of the time zone, usually an acronym. (Range: 1-15 characters)
<0-12> - Number of hours before/after UTC. (Range: 0-12 hours)
<0-59> -
Number of minutes before/after UTC. (Range: 0-59 minutes)
before-utc -
Sets the local time zone before (east) of UTC.
after-utc -
Sets the local time zone after (west) of UTC.
Default Setting
Taipei 08:00 After UTC
Command Mode
Global Config
7.11 System Utilities
7.11.1 clear
7.11.1.1 clear arp
This command causes all ARP entries of type dynamic to be removed from the ARP cache.
Syntax
clear arp
Default Setting
None