FUJITSU PRIMERGY BX600 - Manual (Page 213)

System Log Management Commands Command Reference
Intelligent Blade Panel Module
212
7.6.4.3 logging host
This command enables logging to a host where up to eight hosts can be configured.
Syntax
logging host [ ] [[ | <0-7>]]
-
IP address of the log server.
-
Port number.
[ | <0-7>] -
The value is specified as either an integer from 0 to 7 or
symbolically through one of the following keywords: emergency (0), alert (1), critical (2),
error (3), warning (4), notice (5), informational (6), debug (7).
Default Setting
None
Command Mode
Privileged Exec
This command disables logging to hosts.
Syntax
logging host remove
< hostindex > - Index of the log server.
Default Setting
None
Command Mode
Privileged Exec