FUJITSU PRIMERGY BX600 - Manual (Page 25)

Features of the IBP Module Introduction
Intelligent Blade Panel Module
24
straight-through cable (with auto-negotiation enabled)
l Auto-negotiation enables each port to automatically select the optimum speed (10, 100
or 1000 Mbps) and communication mode (half or full duplex) if this feature is supported
by the attached device; otherwise the port can be configured manually
l IEEE 802.3ab Gigabit Ethernet compliance ensures compatibility with
standards-based network cards and switches from any vendor
2.3.2 Performance
l Transparent bridging
l Aggregate bandwidth up to 12 Gbps
l Switching Table with 16K MAC address entries
l Filtering and forwarding at line speed
l Non-blocking switching architecture
2.3.3 Management
l Telnet, SNMP/RMON and Web-based interface
l Multicast Switching based on IGMP (Internet Group Management Protocol) Snooping and
Multicast Filtering
l Broadcast storm suppression
l Link aggregaton
l Management access security provided with username/password, and SNMP community
names