FUJITSU PRIMERGY BX600 - Manual (Page 278)

Accessing MIB Objects Using SNMP
Intelligent Blade Panel Module 277
8.2 Accessing MIB Objects
MIB objects represent features of the IBP that an SNMP application can control and manage.
One example is the RFC-2233 IF-MIB group which you can use to get or set the port
configuration by reading or writing to different variables in this MIB group. The variables
supported by this group are listed in the following table.
RFC 2233 IF-MIB
interfaces
ifNumber No RO
ifMIBObjects
ifTableLastChange YES RO
ifStackLastChange No RO
ifTable Index: ifIndex
ifDescr Yes RO
ifType Yes RO
ifMtu Yes RO
ifSpeed Yes RO
ifPhysAddress Yes RO
ifAdminStatus Yes RW
ifOperStatus Yes RO
ifLastChange Yes RO
ifInOctets Yes RO
ifInUcastPkts Yes RO
ifInNUcastPkts Yes RO
ifInDiscards Yes RO
ifInErrors Yes RO
ifInUnknownProtos NO RO