FUJITSU PRIMERGY BX600 - Manual (Page 171)

Device Configuration Commands Command Reference
Intelligent Blade Panel Module
170
7.4.11 Service VLAN
7.4.11.1 Show Commands
This command display the Service VLAN information.
Syntax
show svc-vlan []
- The name of Service VLAN which user want to display.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Service VLAN name:
This indicates the name of Service VLAN
VLAN ID: The VLAN Identifier of the Service VLAN. The range of the VLAN ID is from 1 to
4094.
Internal Ports:
Internal interface, member of that Service VLAN.
Uplink Set Name:
Specified the Uplink Set for the external connection.
External Ports: External interface, member of the specified Uplink Set.
7.4.11.2 Configuration Commands
7.4.11.2.1 svc-vlan
This command is used to create or destroy a Service VLAN.
Syntax
svc-vlan <1-4094>
no svc-vlan
-
A string associated with Service VLAN as a convenience.
<1-4094> - VLAN ID
-
which uplink set to be the external connection for this service VLAN.