FUJITSU PRIMERGY BX600 - Manual (Page 199)

Management Commands Command Reference
Intelligent Blade Panel Module
198
This command displays the http settings for the IBP.
Syntax
show ip http
Default Setting
None
Command Mode
Privileged Exec
Display Message
HTTP Mode (Unsecure):
This field indicates whether the HTTP mode is enabled or
disabled.
HTTP Port: This field specifies the port configured for HTTP.
HTTP Mode (Secure):
This field indicates whether the administrative mode of secure HTTP
is enabled or disabled.
Secure Port:
This field specifies the port configured for SSLT.
Secure Protocol Level(s):
The protocol level may have the values of SSL3, TSL1, or both
SSL3 and TSL1.
7.5.6.2 ip javamode
This command specifies whether the IBP should allow access to the Java applet in the header
frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
Syntax
ip javamode
no ip javamode
no - This command disallows access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Default Setting
Enabled
Command Mode
Global Config