FUJITSU PRIMERGY BX600 - Manual (Page 231)

Security Commands Command Reference
Intelligent Blade Panel Module
230
Privileged Exec
Display Message
Port Security Administration Mode: Port lock mode for the entire system.
This command shows the port-security settings for a particular interface or all interfaces.
Syntax
show port-security { | all }
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf Interface Number.
Interface Admin Mode Port Locking mode for the Interface.
Dynamic Limit
Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Mode Whether violation traps are enabled.
This command shows the dynamically locked MAC addresses for port.
Syntax
show port-security dynamic
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address
Dynamically locked MAC address.
This command shows the statically locked MAC addresses for port.