FUJITSU PRIMERGY BX600 - Manual (Page 202)

Management Commands Command Reference
Intelligent Blade Panel Module
201
Global Config
7.5.6.7 ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Syntax
ip http secure-protocol [protocollevel2]
no ip http secure-protocol [protocollevel2]
- The protocol level can be set to TLS1, SSL3 or to both TLS1 and
SSL3.
no -
This command is used to remove protocol levels (versions) for secure HTTP.
Default Setting
SSL3 and TLS1
Command Mode
Global Config
7.5.7 Secure Shell (SSH) Commands
7.5.7.1 show ip ssh
This command displays the SSH settings.
Syntax
show ip ssh
Default Setting
None
Command Mode
Privileged Exec