beautypg.com

Groups administration – FUJITSU PRIMERGY BX600 User Manual

Page 50

background image

Groups Administration

Web-Based Management Interface

Intelligent Blade Panel Module

49

6.2.1.3

Managing VLAN Port Groups

6.2.1.3.1. Configuring VLAN Port Group Configuration Page

The purpose of the VLAN port group configuration is to create groups based on the VLAN
basis, and to modify the existing groups. Only the internal ports could be defined to be the
member of the VLAN port groups. The external connection is defined by specifying an Uplink
Set.

Selection Criteria

VLAN Port Group Name

– You can use this screen to configure an existing VLAN Port

Group, or to create a new one. Use this pulldown menu to select one of the existing VLAN
Port Groups, or select 'Create' to add a new one.

Configurable Data

VLAN Port Group Name

– Specify the name for the new VLAN Port Group. It can be up

to 32 alphanumeric characters, including blanks.

VLAN ID

– the VLAN Identifier for the VLAN Port Group. The range of the VLAN ID is from

1 to 4094.

Uplink Set Name

– Specify the uplink set for the external connection. If the pulldown

menu shows "----------", it means that there is no available uplink set.

Participation

– Use the pull-down menu to configure a interface to participate in this

VLAN port group. The factory default is ‘Exclude’. The possible values are:

- Include: This interface is the member of the VLAN port group.

- Exclude: This interface is not the member of the VLAN port group.

Native VLAN – Use the pull-down menu to configure a VLAN group to behavior as the

Native VLAN port group.

- Enable: Enabling this VLAN Port Group to be a Native VLAN Port Group.

- Disable: Disabling this Native VLAN Port Group.

Non-Configurable Data

Slot/Port – The interface

Type – The interface type. Type should be internal.

Status –Indicates the current value of the participation parameter for the interface.

Command Buttons

Submit

– Update the IBP the values on this screen. If you want the IBP to retain the new

values across a power cycle, you have to perform a save.

Delete

- Delete the VLAN port group.