FUJITSU PRIMERGY BX600 - Manual (Page 103)

Extended Configuration Menu
Web-Based Management Interface
Intelligent Blade Panel Module
102
6.2.4.1.4 Configuring Console Log Page
This allows logging to any serial device attached to the host.
Configurable Data
Admin Status -A log that is "Disabled" shall not log messages. A log that is "Enabled"
shall log messages. Enable or Disable logging by selecting the corresponding line on the
pulldown entry field.
Severity Filter
- A log records messages equal to or above a configured severity
threshold. Select the severity option by selecting the corresponding line on the pulldown
entry field. These severity levels have been enumerated below:
-Emergency (0): system is unusable
-Alert (1): action must be taken immediately
-Critical (2): critical conditions
-Error (3): error conditions
-Warning (4): warning conditions
-Notice(5): normal but significant conditions
-Informational(6): informational messages
-Debug(7): debug-level messages
Command Buttons
Submit - Update the IBP with the values you entered.
6.2.4.1.5 Viewing Event Log Page
Use this panel to display the event log, which is used to hold error messages for catastrophic