FUJITSU PRIMERGY BX600 - Manual (Page 166)

Device Configuration Commands Command Reference
Intelligent Blade Panel Module
165
linkstate
no linkstate
-
A string associated with uplink set as a convenience. It should be an
existing uplink set.
no -
This command disable linkstate for an existing uplink set.
Default Setting
None
Command Mode
Global Config
7.4.9 VLAN Port Groups
7.4.9.1 Show Commands
This command display the vlan group information.
Syntax
show vlan-group []
-
The name of a vlan port group which user want to display.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VLAN port group name: This indicates the name of vlan port group
VLAN ID:
The VLAN Identifier of the VLAN Port Group. The range of the VLAN ID is from 1
to 4094
Internal Ports:
Internal interface, member of that VLAN Port Group.
Uplink Set Name:
Specified Uplink Set for the external connection
External Ports: External interface, member of the specified Uplink Set.
Native VLAN: . Native VLAN feature is support on this VLAN Port Group or not