Fortinet FortiAnalyzer 3.0 MR7 - Manual (Page 38)

FortiAnalyzer Version 3.0 MR7 Administration Guide
38 05-30007-0082-20080908
Dashboard System
Intrusion Activity
Intrusion Activity displays the top attacks that occurred on the network. This
information is gathered from attack logs.
You can edit the Intrusion Activity widget to display specific information by using
the following procedure.
Figure 14: Intrusion Activity widget
To edit the information for Intrusion Activity
1 Go to System > Dashboard.
2 In Intrusion Activity, select Edit in the title bar area.
3 Enter the appropriate information for the following:
4 Select OK.
You can view the log messages that are associated with the information that
displays in Intrusion Activity by selecting the links.
Virus Activity
Virus Activity displays the virus activity that has occurred on the devices. This
information is gathered from virus logs. You can edit Virus Activity to display
specific information.
The following procedure describes how to edit the Virus Activity widget.
Device Select the registered device or device group from the drop-down
list.
Display by Select one of the following to filter the log information:
•
Top Sources (to any) – filters any top source IP addresses
• Top Destinations (from any) – filters any top destination IP
addresses
• Top Intrusions – filters the top intrusion activity
• Time Period – filters the top intrusion activity by period of time,
from 00:00:00 to 23:59:59 (24 hours).
Time Scope Select one of the following for the time range:
•
Hour – filters the time by hour
• Day – filters the time by the current day
• Week – filters the time by the current week
• Month – filters the time by the current month
No. Entries Select the number of entries to display. For example, if you want
to display 10 entries, select 10 from the drop-down list. You can
specify only 5, 10, or 20.