Fortinet FortiAnalyzer 3.0 MR7 - Manual (Page 188)

FortiAnalyzer Version 3.0 MR7 Administration Guide
176 05-30007-0082-20080908
Upgrading your FortiAnalyzer unit Managing firmware versions
This operation will replace the current firmware version!
Do you want to continue? (y/n)
6 Type y.
The FortiAnalyzer unit uploads the firmware image file, upgrades to the new
firmware version, and restarts. This process takes a few minutes.
7 Reconnect to the CLI.
8 Enter the following command syntax to confirm the firmware image installed
successfully:
get system status
9 Update AV/NIDS definitions so that they are current with the new firmware.
Verifying the upgrade
After logging back into the web-based manager, most of your FortiLog 1.6
configuration settings have been carried forward.
You should verify what configuration settings carried forward. You should also
verify that administrative access settings carried forward as well. Verifying your
configuration settings enables you to familiarize yourself with the new features
and changes in FortiAnalyzer 3.0.
You can verify your configuration settings by:
• going through each menu and tab in the web-based manager
• using the show shell command in the CLI