Fortinet FortiAnalyzer 3.0 MR7 - Manual (Page 128)

FortiAnalyzer Version 3.0 MR7 Administration Guide
124 05-30007-0082-20080908
Configuring reports Reports
Alias Select the appropriate alias from the drop-down list. See
Configuring IP alias on page 50 for more information about
configuring IP aliases.
You can filter on IP ranges or subnets. For example:
•
172.20.110.0-255 matches all IP addresses in the
172.20.110.0/255.255.255.0 or 172.20.120.110/24
• 172.20.110.0-140.255 matches all IP addresses from
172.20.110.0 to 172.20.140.255
• 172.16.0.0-20.255.255 matches all IP addresses from
172.16.0 to 172.20.255.255
not Select to instead include only log messages that do not match
this criterion. For example, you might include logs except
those matching a specific source IP address.
Destination(s) Enter the destination IP address to include matching logs, or select
from the Alias list. Separate multiple sources with a comma. See
“Configuring IP aliases” on page 61 for more information about
configuring IP aliases.
Alias
Select the appropriate alias. Select the appropriate alias from
the drop-down list. See Configuring IP alias on page 50 for
more information about configuring IP aliases.
You can filter on IP ranges or subnets. For example:
•
172.20.110.0-255 matches all IP addresses in the
172.20.110.0/255.255.255.0 or 172.20.120.110/24
• 172.20.110.0-140.255 matches all IP addresses from
172.20.110.0 to 172.20.140.255
• 172.16.0.0-20.255.255 matches all IP addresses from
172.16.0 to 172.20.255.255
not Select to instead include only log messages that do not match
this criterion. For example, you might include logs except
those matching a specific destination IP address.
Interface(s) Enter the network interface or interfaces to include matching logs.
Separate multiple interface names with a comma
not
Select “not” to instead include only log messages that do not
match this criterion. For example, you might include logs
except those matching a specific network interface.
Policy ID(s) Enter the FortiGate firewall Policy ID numbers to include matching
logs. The report will include logs from all FortiGate log files containing
firewall policy ID numbers, which excludes event and content archive
logs. Separate multiple policy IDs with a comma.
not
Select to instead include only log messages that do not match
this criterion. For example, you might include logs except
those matching a specific policy ID.
Service(s) Enter specific services to include matching logs. Separate multiple
services with a comma.
not
Select “not” to instead include only log messages that do not
match this criterion. For example, you might include logs
except those matching a specific service.
Day of the Week Select specific days of the week to include matching logs.