Overview, Features – ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount User Manual

Page 6

• Biometric recognition products are not 100% applicable to anti-spoofing

environments . If you require a higher security level, use multiple authen-

tication modes .

• Working temperature: 0°C to 50°C
• Indoor use . The device should be at least 2 meters away from the light,

and at least 3 meters away from the window .

C H AP T E R 1. OVE RV I E W

1.1. OVERVIEW

Face recognition terminal is a kind of access control device for face recog-

nition, which is mainly applied in security access control systems, such as lo-

gistic centers, airports, university campuses, alarm centrals, dwellings, etc .

1.2. FEATURES

• Supports Vanadium Oxide uncooled sensor to measure target’s tempera-

ture .

• Temperature measuring range: 30°C to 45°C (86°F to 113°F), accuracy:

0 .1°C, deviation: ±0 .5°C .

• Recognition distance: 0 .3 to 1 .8 m .
• Fast temperature measurement mode: Detects face and takes skin-sur-

face temperature without identity authentication .

• Multiple authentication modes are available: card and temperature, face

and temperature, card and face and temperature, etc .

• Face mask wearing alert, is an Option that can be enabled .
If the recognizing face does not wear a mask, the device will prompt a voice

reminder . At the same time, the authentication or attendance is valid .

• Forced mask wearing alert, is an Option that can be enabled .
If the recognizing face does not wear a mask, the device will prompt a voice

reminder . At the same time, the authentication or attendance will be failed .

• Triggers voice prompt when detecting abnormal temperature .
• Configurable door status (open/close) when detecting abnormal tempera-

ture .

• Transmits on-line and off-line temperature information to the client soft-

ware via TCP/IP communication and saves the data on the client soft-

ware .

• Face recognition duration <0 .2 s/User; face recognition accuracy rate

≥99% .

• 6000 face capacity, 6000 card capacity, and 100,000 event capacity .
• Suggested height for face recognition: between 1 .4 m and 1 .9 m .
• Watchdog design and tamper function .
• Audio prompt for authentication result .
• NTP, manually time synchronization, and auto synchronization .
• Connects to external access controller or Wiegand card reader via Wie-

gand protocol .

• Connects to secure door control unit via RS-485 protocol to avoid the

door opening when the terminal is destroyed .

• Imports and export data to the device from the client software .

C H AP T E R 2 . APPE A R A N C E

Refer to the following contents for detailed information of the face recogni-

tion terminal:

Figure 2-1. Face Recognition Terminal Diagram