ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount - Manual (Page 16)

30 31
6.2.2. Login by Administrator
After you add the administrator for the device, only the administrator can log-
in the device for device operation .
Steps
1 . Long tap on the initial page for 3 s to enter the admin login page .
Figure 6-3. Admin Login
2 . Authenticate the administrator’s face or card to enter the home page .
Figure 6-4. Home Page
NOTE
The device will be locked for 30 minutes after 5 failed face or card
attempts.
3 . Optional: Tap and you can enter the device activation password for
login .
4 . Optional: Tap and you can exit the admin login page .
6.3. COMMUNICATION SETTINGS
You can set the network parameters, the RS-485 parameters, and the Wie-
gand parameters on the communication settings page .