ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount - Manual (Page 54)

106 107
7.10.19. Operate Relay
Steps
1 . Click Maintenance and Management → Device to enter the device list .
2 . Click to enter the remote configuration page .
3 . Click Operation
→ Relay .
4 . Enable or disable the relay .
7.10.20. View Relay Status
Click Maintenance and Management → Device to enter the device list .
Click to enter the remote configuration page .
Click Status → Relay and you can view the relay status .
A . T I P S W H E N C O LLEC T I N G /
C O M PA R I N G FAC E P I C T U R E
The position when collecting or comparing face picture is as below:
Positions (Recommended Distance: 0.5 m)
Expression
• Keep your expression naturally when collecting or comparing face pic-
tures, just like the expression in the picture below .
• Do not wear hat, sunglasses, or other accessories that can affect the fa-
cial recognition function .
• Do not make your hair cover your eyes, ears, etc . and heavy makeup is
not allowed .
Posture
In order to get a good quality and accurate face picture, position your face
looking at the camera when collecting or comparing face pictures .
Size
Make sure your face is in the middle of the collecting window .
B . T I P S FO R I N S TA LL AT I O N
E N V I R O N M E N T
1 . Light Source Illumination Reference Value
Candle: 10 Lux
Bulb: 100~850 Lux
Sunlight: More than 1200 Lux
2 . Install the device at least 2 meters away from the light, and at least 3
meters away from the window or door .