ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount - Manual (Page 31)

60 61
Password
Enter the device password .
CAUTION
The password strength of the device can be automatically checked.
We highly recommend you change the password of your own choosing
(using a minimum of 8 characters, including at least three kinds of fol-
lowing categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in
the high security system, changing the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Import to Group
Enter 1 to create a group by the device name . All the channels of the device
will be imported to the corresponding group by default . Enter 0 to disable this
function .
6 . Click and select the template file .
7 . Click Add to import the devices .
7.2.2. Reset Device Password
If you forgot the password of the detected online devices, you can reset the
device password via the client .
Steps
1 . Enter Device Management page .
2 . Click Online Device to show the online device area .
All the online devices sharing the same subnet will be displayed in the list .
3 . Select the device from the list and click on the Operation column .
4 . Reset the device password .
• Click Generate to pop up the QR Code window and click Download to
save the QR code to your PC . You can also take a photo of the QR code to
save it to your phone . Send the picture to our technical support .
NOTE
For the following operations for resetting the password, contact our
technical support.
CAUTION
The password strength of the device can be automatically checked.
We highly recommend you change the password of your own choosing
(using a minimum of 8 characters, including at least three kinds of fol-
lowing categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in
the high security system, changing the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
7.3. GROUP MANAGEMENT
The client provides groups to manage the added resources in different
groups . You can group the resources into different groups according to the re-
sources’ locations .
Example
For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and
16 alarm outputs . You can organize these resources into one group (named
1st Floor) for convenient management . You can control door status and do
some other operations of the devices after managing the resources by groups .
7.3.1. Add Group
You can add group to organize the added device for convenient management .
Steps
1 . Enter the Device Management module .
2 . Click Device Management
→ Group to enter the group management
page .
3 . Create a group .
• Click Add Group and enter a group name as you want .
• Click Create Group by Device Name and select an added device to create
a new group by the name of the selected device .
NOTE
The resources (such as alarm inputs/outputs, access points, etc.) of
this device will be imported to the group by default.
7.3.2. Import Resources to Group
You can import the device resources (such as alarm inputs/outputs, access
points, etc .) to the added group in a batch .
Before You Start
Add a group for managing devices . Refer to Add Group .
Steps
1 . Enter the Device Management module .
2 . Click Device Management
→ Group to enter the group management
page .
3 . Select a group from the group list and select the resource type as Access
Point, Alarm Input, Alarm Output, etc .
4 . Click Import .
5 . Select the thumbnails/names of the resources in the thumbnail/list view .
NOTE
You can click or to switch the resource display mode to thumb-
nail view or to list view.
6 . Click Import to import the selected resources to the group .
7.3.3. Edit Resource Parameters
After importing the resources to the group, you can edit the resource param-
eters . For access point, you can edit the access point name . For alarm input,
you can edit the alarm input name . Here we take access point as an example .