beautypg.com

User management – ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount User Manual

Page 18

background image

34

35

6.4. USER MANAGEMENT

On the user management interface, you can add, edit, delete, and search

the user .

6.4.1. Add Administrator

The administrator can login the device backend and configure the device pa-

rameters .

Steps

1 . Long tap on the initial page and log in the backend .
2 . Tap User

+ to enter the Add User page .

3 . Edit the employee ID .

NOTE

The employee ID should be less than 32 characters. And it can be a

combination of lower letters, upper letters, and numbers.

The employee ID should not be duplicated.

4 . Tap the Name field and input the user name on the soft keyboard .

NOTE

Numbers, upper case letters, lower case letters, and special characters

are allowed in the user name.

Up to 32 characters are allowed in the user name.

5 . Optional: Add a face picture, cards, or password for the administrator .

NOTE

For details about adding a face picture, see Add Face Picture.
For details about adding a card, see Add Card.
For details about adding a password, see Add Password.

6 . Optional: Set the administrator’s authentication type .

NOTE

For details about setting the authentication type, see Set Authentica-

tion Mode.

7 . Enable the Administrator Permission function .

Enable Administrator Permission

The user is the administrator . Except for the normal attendance function, the

user can also enter the Home page to operate after authenticating the permis-

sion .

8 . Tap

to save the settings .

6.4.2. Add Face Picture

Add user’s face picture to the device . And the user can use the face picture

to authenticate .

Steps

1 . Long tap on the initial page and log in the backend .
2 . Tap User

+ to enter the Add User page .

3 . Edit the employee ID .

NOTE

The employee ID should be less than 32 characters. And it can be a

combination of lower letters, upper letters, and numbers.

The employee ID should not be duplicated.

4 . Tap the Name field and input the user name on the soft keyboard .

NOTE

Numbers, upper case letters, lower case letters, and special characters

are allowed in the user name.

Up to 32 characters are allowed in the user name.

5 . Tap the Face Picture field to enter the face picture adding page .

Figure 6-8. Add Face Picture

6 . Position your face looking at the camera .