Login – ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount User Manual

Page 15

Figure 6-1. Welcome Page

2 . Tap OK to save .

NOTE

You can also change the settings in System Settings.
If you install the device indoors near the window or the face recognition

function is not working well, select Others.

If you do not configure the application mode and tap Next, the system

will select Indoor by default.

If you activate the device via other tools remotely, the system will select

Indoor as the application mode by default.

6.2. LOGIN

device activation password for the first login . Or if you have add the adminis-

trator’s credential, you can login via the configured credential .

6.2.1. Login for First Time

You should login into the system before other device operations .

Steps

1 . Long tap on the initial page for 3 s to enter password entering page .
2 . Tap the Password field and enter the device activation password .
3 . Tap OK to enter the home page .

NOTE

The device will be locked for 30 minutes after 5 failed password

attempts.

For details about setting the administrator authentication mode, see

Adding User.

Figure 6-2. Home Page