Time and attendance status settings – ATN TITEW1000 Thermal Entry Wizard Access Control Station with Table Stand Mount User Manual

Page 25

6.10.3. Log Query

You can search the authentication logs within a period of time by inputting

employee ID, card No ., or user name .

Steps

1 . On the Home page, tap Log (Log) to enter the Log page .

Figure 6-15. Log Query

2 . Tap Card on the left of the page and select a search type from the drop-

down list .

3 . Tap the input box and input the employee ID, the card No ., or the user

name for search .

4 . Select a time .

NOTE

You can select from Custom, Yesterday, This Week, Last Week, This

Month, Last Month, or All. If you select Custom, you can customize the

start time and the end time for search.

5 . Tap

to start search .

The result will be displayed on the page .

6.11. TIME AND ATTENDANCE STATUS SETTINGS

Set time and attendance status . You can set the attendance mode as check

in, check out, break out, break in, overtime in, and overtime out according to

your actual situation .

NOTE

The function should be used cooperatively with time and attendance

function on the client software.

6.11.1. Disable Attendance Mode via Device

Disable the attendance mode and the system will not display the attendance

status on the initial page .

Tap T&A Status to enter the T&A Status page .

Figure 6-16. Disable Attendance Mode

Set the Attendance Mode as Disable . And tap

You will not view or configure the attendance status on the initial page . And

the system will follow the attendance rule that configured on the platform .

6.11.2. Set Auto Attendance via Device

Set the attendance mode as auto, and you can set the attendance status

and its available schedule . The system will automatically change the atten-

dance status according to the configured parameters .

Before You Start

Add at least one user, and set the user’s authentication mode . For details,

see User Management .

Steps

1 . Tap T&A Status to enter the T&A Status page .
2 . Set the Attendance Mode as Auto .

Figure 6-17. Disable Attendance Mode

3 . Select an attendance status and set its schedule .

a) Select Check In, Check Out, Break Out, Break In, Overtime In, or Over-

time Out as the attendance status .

b) Tap Schedule .