Pilz PSS SB HYD, Basic license - Manual (Page 291)

9-3 Modular Block System: Hydraulic Presses
INFORMATION
Always use the current version of the relevant standard function block for
your application program.
Changes to the standard function blocks
INFORMATION
When imported into existing projects, new parameters must be set for
standard function blocks in which input or output parameters have been
amended (additional I/O parameters, notation changed, description
changed etc.).
Please note:
STOP An SB version marked with this symbol can only replace the
previous SB version in an existing application program if new
parameters are set for it once imported.
SB051: Operating mode selector switch, 1 from 8
Version Date CRC
1.0 22.05.96 8E44
1.1 15.08.97 57F4 STOP
Changes from Version 1.0 to Version 1.1
• Name changed from “BA_1aus8” to “BA_1AUS8”
• Addition of input parameter TIME.
This input parameter enables you to adjust the contact switchover time
on the operating mode selector switch.
Permitted value range for the contact switchover time: 1 ... 2047 ms
CRC
E8CA
C9CA
2465
SB No.
SB089
SB092
SB097
Date
09.07.97
31.07.97
04.03.02
Version
1.0
1.0
1.0
Name
H_VALV_P
ENBL_DEV
MUT_LAMP
Approval to
EN954-1
EN954-1
EN954-1