Pilz PSS SB HYD, Basic license - Manual (Page 142)

6-80 Modular Block System: Hydraulic Presses
Standard Function Blocks SB070
SB070: Initialisation of administration data block DB015
Block header
Input parameters
• KoSy: Contact synchronisation time of 2 N/O or N/C contacts
• RRFK: Reaction time feedback loop contactor
• KU_S: Contact switchover time N/O / N/C on buttons
• KU_R: Contact switchover time N/O / N/C on relays
• MaZy: Machine cycle time for cycling ESPE/AOPD
• RBWS: ESPE/AOPD reaction time
• RVen: Valve switchover time
Function
• Reads in the preset minimum scan time from DB002
A minimum scan time must always be configured if you are using MBS
blocks. Please refer to the section entitled “Minimum scan time” in
Chapter 5.
• Calculates the cycles using the times transferred in the parameters
• Enters the values into global parameters DW1001 ... DW1007 of
administration data block DB015.
SB 070
INIT_MBS
B - KoSy
B - RRFK
B - KU_S
B - KU_R
W - MaZy
B - RBWS
W - RVen