HP 9600 Series - Manual (Page 60)

ENWW 4-27
Performing manual duplexing
You can print on both sides of a sheet of paper by manually turning the paper over and feeding
it into the printer again.
For Windows
1 Load the appropriate paper (see “Loading media in the input tray” ).
2 Open the printer driver (see “Printing a document” ).
3 Click the Finishing tab.
4 Select the Print on Both Sides check box, and ensure Use Auto-Duplex Unit is cleared.
5 Select Flip Pages Up to change the page orientation, if desired.
6 Choose a booklet layout from the Booklet Layout is drop-down list, if desired.
7 Change any other desired print settings and click OK .
8 Print your document.
9 Follow the onscreen instructions to complete the printing.
After one side of the page is printed, you need to reload the paper to print on the other
side.
For Macintosh (Mac OS 9.1.x and 9.2.x)
1 Load the appropriate paper (see “Loading media in the input tray” ).
2 Click File , and then click Print .
3 Open the Layout panel.
4 Select Print Both Sides , and then select Manual if the auto-duplex unit is installed.
5 Select the desired binding orientation by clicking the appropriate icon.
6 Change any other desired print settings and click OK or Print .
7 Follow the onscreen instructions to complete the printing.
After one side of the page is printed, you need to reload the paper to print on the other
side.
Manual duplexing is available when the printer is connected directly to your system and is not
shared on a network.