HP 9600 Series - Manual (Page 49)

4-16 ENWW
Printing on various media types
For Windows
1 Load the print media (see “Loading media in the input tray” ).
2 Open the printer driver (see “Printing a document” ).
3 Click the Paper/Quality tab.
4 Select the media type from the Type is drop-down list.
5 Select the media size from the Size is drop-down list.
6 Select the paper source from the Source is drop-down list.
7 Change any other desired print settings and click OK .
8 Print your document.
For Macintosh
1 Load the print media (see “Loading media in the input tray” ).
2 Click File , and then click Page Setup .
3 Select the media size.
4 Click File , and then click Print .
5 Mac OS 9.1.x and 9.2.x: In the General panel, select the paper source from the
Paper Source drop-down list.
6 Open the Paper Type/Quality panel.
7 Mac OS 9.1.x and 9.2.x: Select the media group from the Category drop-down list and
media type from the Paper Type drop-down list.
Mac OS X (10.1 and later): Click the Paper tab and select the media type and source.
8 Change any other desired print settings and click OK or Print .
Use HP media for optimum print quality. These media types are specifically designed to
work with your printer. See
“HP supplies and accessories” for part numbers and ordering
information.
If you are printing transparencies, it is recommended to remove each transparency as it
prints and set it aside to dry.