HP 9600 Series User Manual
Page 3
ENWW
Copyright Information
© 2003 Copyright
Hewlett-Packard Development
Company, L.P.
Reproduction, adaptation or
translation without prior written
permission is prohibited,
except as allowed under the
copyright laws.
Edition 1.1, 11/2003
Notice
The information contained
herein is subject to change
without notice.
The only warranties for HP
products and services are set
forth in the express warranty
statements accompanying
such products and services.
Nothing herein should be
construed as constituting an
additional warranty. HP shall
not be liable for technical or
editorial errors or omissions
contained herein.
A user of the Hewlett-Packard
product associated with this
guide is granted a license to:
a) print hard copies of this user
guide for PERSONAL,
INTERNAL, or COMPANY use
subject to the restriction not to
sell, resell, or otherwise
distribute the hard copies; and
b) place an electronic copy of
this user guide on a network
server, provided access to the
electronic copy is limited to
PERSONAL, INTERNAL users
of the Hewlett-Packard product
associated with this guide.
Acknowledgements
HP ColorSmart III and HP
PhotoREt IV are trademarks of
Hewlett-Packard Company.
Microsoft
®
, Windows
®
,
Windows NT
®
, and MS-DOS
®
are U.S.-registered trademarks
of Microsoft Corporation.
Pentium
®
is a U.S.-registered
trademark of Intel Corporation.
TrueType™ is a U.S.
trademark of Apple Computer,
Inc.
UNIX
®
is a registered
trademark of the Open Group.
Safety Information
Always follow basic safety
precautions when using this
product to reduce risk of injury
from fire or electric shock.
1
Read and understand all
instructions in the
documentation that
comes with the printer.
2
Use only a grounded
electrical outlet when
connecting this product to
a power source. If you do
not know whether the
outlet is grounded, check
with a qualified electrician.
3
Observe all warnings and
instructions marked on
the product.
4
Unplug this product from
wall outlets before
cleaning.
5
Do not install or use this
product near water, or
when you are wet.
6
Install the product
securely on a stable
surface.
7
Install the product in a
protected location where
no one can step on or trip
over the line cord, and the
line cord cannot be
damaged.
8
If the product does not
operate normally, see
9
There are no
user-serviceable parts
inside. Refer servicing to
qualified service
personnel.