HP 9600 Series - Manual (Page 47)

4-14 ENWW
Printing with the front or rear manual feed slot
If you are printing one or just a few photos, envelopes, or sheets of paper, you can use the
front manual feed slot and leave your regular media in the input tray.
The rear manual feed slot uses a straight paper path and is designed for printing single sheets
on thick paper (up to 280 g/m
2
) like cardstock and photo paper.
For information on media types and sizes supported by the manual feed slots, see
“Understanding specifications for supported media” .
To print using the front or rear manual feed slot
1 For Windows:
i Open the printer driver (see “Printing a document” ).
ii Click the Paper/Quality tab.
iii Select the manual feed option from the Source is drop-down list.
iv Change any other desired print settings and click OK .
v Print your document.
For Macintosh:
i Click File , and then click Page Setup .
ii Select the media size.
iii Click File , and then click Print .
iv Mac OS 9.1.x and 9.2.x: In the General panel, select the manual feed option from the
Paper Source drop-down list.
v Open the Paper Type/Quality panel.
vi Mac OS 9.1.x and 9.2.x: Select the media group from the Category drop-down list and
media type from the Paper Type drop-down list.
Mac OS X (10.1 and later): Click the Paper tab and select the media type and source.
vii Change any other desired print settings and click OK or Print .
2 When the Resume light blinks, do the following:
If the auto-duplex unit is installed and you want to print using the rear manual feed slot, replace
the auto-duplex unit with the rear access panel.