For macintosh – HP 9600 Series User Manual
Page 58
ENWW
4-25
For Macintosh
1
Load the appropriate paper:
• If you are printing one or just a few sheets, you can use the front or rear manual feed
slot. If so, continue with the steps below and load the paper in a later step.
• If you are using the input tray, see
“Loading media in the input tray”
.
2
Open the file you wish to print.
3
Click
File
, and then click
Page Setup
.
4
Select the borderless paper size.
5
Click
File
, and then click
.
6
Open the
Paper Type/Quality
panel.
7
Mac OS 9.1.x and 9.2.x: Select the media group and type.
Mac OS X (10.1 and later): Click the
Paper
tab and select the media type and source.
8
If you are printing photos, select
Best
print quality. Alternatively, select
Maximum dpi
,
which provides up to 4800
x
1200 optimized dpi* for optimum print quality.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting will
temporarily use a large amount of hard disk space (400 MB or more) and will print slower.
Photo cartridge, if present, further enhances the print quality.
9
Change any other desired print settings and click
OK
or
.
10
If you are printing on thick or photo paper, insert paper into the rear manual feed slot at the
back of the printer. (For instructions on feeding paper manually, see
.)
11
If you printed on photo paper with a tear-off tab, remove the tab to make the document
completely borderless.