HP INTEGRITY RX3600 - Manual (Page 223)

Figure 6-23 Processor Alignment Holes and Lock/Unlock Mechanism
Lock/Unlock
Mechanism
Alignment Holes
Installing a Dual-Core Processor
To install a dual-core processor, follow these steps:
NOTE: Prior to installing a dual-core processor into the server, read the following instructions
carefully and see the figures in this chapter for a complete understanding of this process.
1. Power off the server and disconnect the power cables. See “Powering Off the Server”
(page 95) .
2. If rack installed, slide the server out from the rack until it stops. See “Extending the Server
from the Rack” (page 180) .
Removing and Replacing a Dual-Core Processor 223