HP STORAGEWORKS E1200-160 - Manual (Page 96)

Serial/Telnet User Interface
96 Network Storage Router e1200-160
Configuration Menu
The Configuration Menu is used to configure the router.
Figure 39 is an illustration of the Configuration Menu.
Figure 39: Configuration menu
Note: The router is shipped with a configuration of default settings that is acceptable
for most system environments. Few changes to the configuration should be necessary.
After any configuration changes are made, select A) Save Configuration to record the
changes.
If the configuration has been modified to meet company-specific needs, back up the
company-specific configuration to an external file. If necessary, these settings can later
be restored to the router.
Configuration Menu options:
■ 1) Baud Rate Configuration changes the baud rate on the serial port.
■ 2) Ethernet and SNMP (SNMP not supported) Configuration enters
Ethernet network settings.
■ 3) Fibre Channel Configuration configures the settings for the Fibre
Channel port.
■ 4) Parallel SCSI Configuration configures the settings for the SCSI buses.