Displaying the current map – HP STORAGEWORKS E1200-160 User Manual
Page 110
Serial/Telnet User Interface
110
Network Storage Router e1200-160
Caution:
If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
To indicate which map is to be the current map, type the number that corresponds
to the desired map.
Displaying the Current Map
In the Device Mapping Configuration Menu, choose 2) Display Current Map to
view the entries for the current Map.
The Current Map Display screen is displayed.
Depending on whether a Fibre Channel map or a SCSI map was selected, the
screen display will differ.
and
are illustrations of the different screen displays for Fibre
Channel maps and SCSI maps.
Figure 46: FCP Current Map Display screen
Note:
The entire list may not fit on one screen. Press N or P to go back and forth
between screens.