Telnet, Telnet ftp – HP STORAGEWORKS E1200-160 User Manual
Page 28
Configuration Overview
28
Network Storage Router e1200-160
Telnet
From most Microsoft
®
Windows
®
9x, Windows NT
®
, and Windows 2000
®
systems, users can start a Telnet session from the DOS (command) shell after the
IP address has been set.
For complete information on accessing and using the Telnet UI, see Chapter 4,
"
FTP
The router supports the use of the FTP UI to perform several copy procedures
using the
put
and the
get
commands.
For more information, see Chapter 5, "
This manual is related to the following products: