HP STORAGEWORKS E1200-160 - Manual (Page 184)

Regulatory Compliance Notices
184 Network Storage Router e1200-160
BSMI Notice
Laser Device
All HP systems equipped with a laser device comply with safety standards,
including International Electrotechnical Commission (IEC) 825. With specific
regard to the laser, the equipment complies with laser product performance
standards set by government agencies as a Class 1 laser product. The product does
not emit hazardous light; the beam is totally enclosed during all modes of
customer operation and maintenance.
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous radiation:
■
Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
■
Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
■
Allow only HP authorized service technicians to repair the laser device.
Compliance with CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketed in the United States.