HP STORAGEWORKS E1200-160 - Manual (Page 60)

Visual Manager User Interface
60 Network Storage Router e1200-160
SCSI Bus Configuration
When a SCSI bus is selected in the Ports Menu, the SCSI Bus Configuration
screen is displayed.
Figure 21 is an illustration of the SCSI Bus Configuration
screen.
Figure 21: SCSI Bus Configuration screen
SCSI bus configuration settings:
■ Primary Initiator ID (default: 7) must be a unique ID.
■ Alternate Initiator ID (service mode-restricted access) (default: none) will
be used if the primary ID is taken. Must be a unique ID.
■ Target ID(s) adds or removes Target IDs.