Fibre channel configuration, Chapter 4, When using serial/t – HP STORAGEWORKS E1200-160 User Manual
Page 101
Serial/Telnet User Interface
101
Network Storage Router e1200-160
Fibre Channel Configuration
In the Configuration Menu, choose 3) Fibre Channel Configuration to configure
the Fibre Channel port. The Fibre Channel Configuration Menu allows the
configuration of ALPA settings, discovery mode, tape backup settings, port mode,
default map, and override settings.
is an illustration of the Fibre Channel Configuration Menu.
Figure 42: Fibre Channel Configuration menu
This manual is related to the following products: