HP STORAGEWORKS E1200-160 User Manual
Page 48
Visual Manager User Interface
48
Network Storage Router e1200-160
Port Configuration - Ethernet Settings (Service Mode - Restricted Access)
To change the Ethernet configuration settings, select the Ethernet port icon. The
Ethernet Configuration dialog box is displayed.
See
for an example of the Ethernet Configuration dialog box.
Figure 14: Ethernet Configuration dialog box
Ethernet configuration settings:
■
Ethernet Mode can be set to one of the following options:
— 10Mps Only
— 100Mps (half duplex) Only
— 100Mps (full duplex) Only
— 10/100Mps (Auto-Neg.)
■
MAC address is the Ethernet physical address of the router.
Caution:
If this configuration is incorrectly set, processing difficulties may occur.
Before changing this setting, evaluate the need for the change and verify the
desired setting. HP recommends backing up the router configuration to an
external file before making changes to this setting.