3 configuring wiper, Procedure – Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision User Manual
Page 89
Operation Manual
78
Procedure
Step 1
Select
>
System
>
Peripheral
>
External Light
.
Step 2
Select working mode as needed.
Figure 6-76 External light
Table 6-30 Lamp parameters
Parameter
Description
Work Mode
●
Off
: The external light is disabled.
●
Manual
: Set the light brightness manually.
●
Auto
: The camera turns on or turns off the light according to the light
time and photo resister automatically.
Auto Mode
●
Time
: When selecting
Time
in
Auto Mode
, set the arming period.
During the arming period, the external light is on.
Select the added time plan table in the
Time Plan
list. Click
Add
Schedule
to add new time plan table. For details, see "6.4.1.2 Alarm
●
Photo resister
: When you select
Photo resister
in
Auto Mode
, the
camera turns on the external light according to the brightness
automatically.
Light Brightness
Set the brightness of the external light.
For some models, you can set the brightness of each external light
separately.
Step 3
Click
OK
.
6.6.3.3 Configuring Wiper
Step 1
Select
>
System
>
Peripheral
>
Wiper
.
Step 2
Configure working mode of wipers.