Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 33)

Operation Manual
22
Step 3 Click Apply .
6.2.1.6 Day/Night
Configure the display mode of the image. The system switches between color and black-and-white
mode according to the actual condition.
Step 1
Select > Camera > Image > WB .
Figure 6-9 Day/night
Step 2 Configure day and night parameters.
Table 6-6 Description of day and night parameters
Parameter Description
Mode
You can select device display mode from Color , Auto , and B/W .
Day/Night configuration is independent from profile management
configuration.
● Color : The system displays color image.
● Auto : The system switches between color and black-and-white
display according to the actual condition.
● B/W : The system displays black-and-white image.
Sensitivity
This configuration is available only when you set Auto in Mode .
You can configure camera sensitivity when switching between color
and black-and-white mode.
Delay
This configuration is available only when you set Auto in Mode .
You can configure the delay when camera switching between color and
black-and-white mode. The lower the value is, the faster the camera
switches between color and black-and-white mode.
Step 3 Click Apply .
6.2.1.7 Illuminator
This configuration is available only when the device is equipped with illuminator.
Step 1
Select > Camera > Image > Illuminator .
Figure 6-10 Light