Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 62)

Operation Manual
51
Parameter Description
Port
The multicast port of corresponding stream: Main Stream : 40000;
Sub Stream1 : 40016; Sub Stream2 : 40032, and all the range is
1025–65500.
Step 3 Click Apply .
Result
On the Live interface, select RTSP in Multicast , and then you can view the video image with
multicast protocol.
6.3.10 Register
After you enable this function, when the camera is connected into Internet, it will report the current
location to the specified server which acts as the transit to make it easier for the client software to
access the camera.
Step 1
Select > Network > Register .
Figure 6-42 Register
Step 2 Click , and then configure server name.
Table 6-19 Description of register parameters
Parameter Description
Server Address The IP address or domain name of the server to be registered.
Port The port for registration.
Sub-Device ID The custom ID for the camera.
Step 3 Click Apply .
6.3.11 QoS
You can solve problems such as network delay and congestion with this function. It helps to assure
bandwidth, reduce transmission delay, packet loss rate, and delay jitter to improve experience.
0–63 means 64 degrees of priority; 0 for the lowest and 63 the highest.
Step 1
Select > Network > QoS .