Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 28)

Operation Manual
17
Figure 6-4 Interface layout (Day/night switch)
6.2.1.2 Image
You can configure picture parameters as needed.
Step 1
Select > Camera > Image > Image .
Figure 6-5 Image
Step 2 Configure picture parameters.
Table 6-2 Description of picture parameters
Parameter Description
Style
Select the picture style from soft, standard and vivid.
● Soft: Default image style, displays the actual color of the image.
● Standard: The hue of the image is weaker than the actual one, and
contrast is smaller.
● Vivid: The image is more vivid than the actual one.
Brightness
Changes the value to adjust the picture brightness. The higher the
value is, the brighter the picture will be, and the smaller the darker.
The picture might be hazy if the value is configured too big.
Contrast
Changes the contrast of the picture. The higher the value is, the more
the contrast will be between bright and dark areas, and the smaller
the less. If the value is set too big, the dark area would be too dark and
bright area easier to get overexposed. The picture might be hazy if the
value is set too small.