Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 36)

Operation Manual
25
Table 6-9 Description of fisheye parameters
Parameter Description
installation Mode You can select Ceiling , Wall , or Ground .
Record Mode
● 1O: The original image before correction.
● 1P: 360° rectangular panoramic image.
● 2P: When the installation mode is Ceiling or Ground , you can set
this mode. Two associated 180° rectangular image screens; at any
time, the two screens form a 360° panoramic image.
● 1R: Original image screen + independent sub-screen. You can
zoom or drag the image in all the screens.
● 2R: Original image screen + two independent sub-screens. You
can zoom or drag the image in all the screens.
● 4R: Original image screen + four independent sub-screens. You
can zoom or drag the image in all the screens.
● 1O + 3R: Original image screen + three independent sub-screens.
You can zoom or drag the image in original image screen, and
move the image (upper and lower) in sub-screens to adjust the
vertical view.
Step 3 Click Apply .
6.2.2 Setting Encode Parameters
This section introduces video parameters, such as video, snapshot, overlay, ROI (region of interest),
and path.
Click Default , and the device is restored to default configuration. Click Refresh to view the latest
configuration.
6.2.2.1 Encode
Configure video stream parameters, such as compression, resolution, frame rate, bit rate type, bit
rate, I frame interval, SVC, and watermark.
Step 1
Select > Camera > Encode > Encode .