Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 70)

Operation Manual
59
Figure 6-51 Record linkage
6.4.1.2.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots when
an alarm is triggered.
Prerequisites
After the corresponding alarm type ( Normal , Motion , or Alarm ) is enabled, the snapshot channel
links capturing picture. For details, see "10.3 Setting Record Plan".
Setting Record Linkage
On the Alarm interface, click to enable snapshot linkage, and select the channel as needed.
Figure 6-52 Snapshot linkage
6.4.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the
Alarm interface, click to enable alarm-out linkage, select the channel as needed, and
then configure Post alarm .
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
Figure 6-53 Alarm-out linkage
6.4.1.2.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to users.
Email linkage takes effect only when SMTP is configured. For details, see "6.3.5 Email".
Figure 6-54 Email linkage