Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 145)

Operation Manual
134
Parameter Description
Exit No.
Counts the number of people entering in the
direction B-->A. When the number exceeds the
configured value, an alarm will be triggered.
Stay No.
It is the difference between the Enter No. and
Exit No. . When the number exceeds the
configured value, an alarm will be triggered.
Clear Clears the counted number.
Area people
counting
Area people counting Enable the area people counting function.
Inside Number Set the number of people in the people counting region. When the people
count reaches the configured value, an alarm will be triggered.
When you set inside number to 0, and select
≥ Threshold in Type , the system
will not perform the alarm linkage.
Type
Stay Alarm
Select the Stay Alarm check box, and then set the stay time, when the stay
duration exceeds the configured value, an alarm will be triggered.
Strand Time
Step 7 Set arming periods and alarm linkage action. For details, see "6.4.1.2 Alarm Linkage".
Click
+ Event Linkage to set the linkage action.
Step 8 Click Apply .
To view alarm information on the alarm subscription tab, you need to subscribe relevant
alarm event. For details, see "6.4.1.3.2 Subscribing Alarm Information".
Result
You can view the counting results on the Live interface.
● For People Counting rule, the entry and exit numbers are displayed.
● For Area People Counting rule, the inside number is displayed.