Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 149)

Operation Manual
138
8.9 Face & Body Detection
After enabling this function, the camera detects faces and human body separately, and then
correlates the face and the body. When selecting compliant mode, the camera can detect attributes
including face masks, helmets, glasses, safety vests, top color, and bottom color, and determine
whether PPE requirements are met. PPE compliance or non-compliance alarms can be triggered
according to the alarm settings.
8.9.1 Global Configuration
Set the global configuration of face & body detection, including face parameter and scene
parameter.
Step 1
Select AI > Smart Plan .
Step 2 Click next to Face & Body Detection to enable face & body detection of the
corresponding channel, and then click Next .
Step 3 Click the Global Config tab.
Step 4 Set parameters.
Figure 8-42 Global configuration of face & body detection
Table 8-17 Description of scene set parameters (face & body detection)
Parameter Description
Target Box Overlay
Overlay target box on the captured pictures to mark the target
position.
Face & Body Image
Enhancement
Click next to Face & Body Image Enhancement to
preferably guarantee clear face and body with low stream.
Face Cutout
Set a range for matting face image, including face, one-inch
photo, and custom.
Detection Priority Select from Face First or Human Body First .