2 system service, 1 802.1x – Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision User Manual

Page 161

Operation Manual

150

Figure 9-2 Security Status

9.2 System Service

9.2.1 802.1x

Cameras can connect to LAN after passing 802.1x authentication.
Step 1

Select

Security

System Service

802.1x

Step 2

Select the NIC name as needed, and click

to enable it.

Step 3

Select the authentication mode, and then configure parameters.

●

PEAP: Protected EAP protocol.

1. Select PEAP as the authentication mode.
2. Enter the username and password that has been authenticated on the server.
3. Click

next to CA certificate, and select the trusted CA certificate in list.

If there is no certificate in the list, click

Certificate Management

at the left

Figure 9-3 802.1x (PEAP)

●

TLS: Transport Layer Security. It is applied in two communication application programs

to guarantee the security and integrity of the data.
1. Select TLS as the authentication mode.
2. Enter the username.